BELIMO Globe Valves
Globe Valves
H2..X-S, 2-way, with internal thread
H3..X-S, 3-way, with internal thread
H6..W-SP, 2-way, with flange PN16
H7..W-S, 3-way, with flange PN16
H7..W-D, 3-way, with flange PN16
Last Update : 15:42:02 18/11/2015
H6..X..-S(P)2 Globe valve, 2-way, Flange, PN 25
Globe valve, 2-way, Flange, PN 25
? For closed (high temperature) hot water and steam systems in the non-critical range
? For water-side modulating control of air-handling and heating systems
Brand : REGIN
Model : RCF-230D
RCF-230D
Room thermostat for fan-coil applications
with on/off outputs.
Intended to control heating and/or cooling in 2- or 4-pipe
installations. Setpoint and fan speed are set using the buttons on the front.
Brand : REGIN
Model : RCF-230AD
RCF-230AD is a room controller intended to control
heating and/or cooling in 2- or 4-pipe installations.
Setpoint and fan speed are set using the buttons on the
front.
Brand : REGIN
Model : RC-DO Room controller with display
RC-DO
Room controller with display
? Awarded design
? Simple installation
? On/Off or 0...10 V control
RC-DO is a room controller from the Regio Mini series
intended to control heating and cooling in a zone control
system.
Brand : BELIMO
Model : D6200W ,D6250W, D6300W
Butterfly valve with Wafer types
? For open and closed cold and warm water systems
? For switching heat generators or cooling machines on and off
GTVS/GTRS 2- and 3-way flanged valve • Size DN32–150 • Kvs value 16–310 • Differential pressure 0.12–1.3 MPa Control valves intended for use in heating and ventilation systems, suitable for cold and hot water, glycol-mixed water or steam. • Pressure rating PN16 • Media temperature -5...+120°C Function GTVS: The valve is open when the stem is at its lower position and closed when the stem is at its highest position. GTRS: As the stem is at its lower position, flow-through between ports A and AB is entirely open (and closed between ports B and AB). As the stem is at its highest position, flow-through between ports B and AB is entirely open (and closed between ports A and AB). Actuators The valves are intended to be used together with actuators of the type RVA... The OVA-F1 adapter kit is factory mounted on models with DN32-40 and OVA-F2 is mounted on models with DN50-150. Installation The valves are to be mounted according to the flow direction arrows on the valve. The 2-way valve is to be mounted with port A as intake and port AB as return (flow direction A in, AB out) to ensure tight closure and prevent noise when closing. The 3-way valve is of mixing type and should be mounted at the mixing point. Make sure to mount the 3-way valve so that correct flow directions are obtained. Material Body in cast iron and stem in stainless steel. Plug and seat in gunmetal. Self-adjusting PTFE packing box and O-rings in Viton. Control of refrigerants The valves can be used with different refrigerants. In this case, a special type of packing box must be mounted. Contact Regin for more information.