BELIMO Globe Valves
Globe Valves
H2..X-S, 2-way, with internal thread
H3..X-S, 3-way, with internal thread
H6..W-SP, 2-way, with flange PN16
H7..W-S, 3-way, with flange PN16
H7..W-D, 3-way, with flange PN16
Last Update : 15:42:02 18/11/2015
H6..X..-S(P)2 Globe valve, 2-way, Flange, PN 25
Globe valve, 2-way, Flange, PN 25
? For closed (high temperature) hot water and steam systems in the non-critical range
? For water-side modulating control of air-handling and heating systems
Brand : REGIN
Model : RCF-230D
RCF-230D
Room thermostat for fan-coil applications
with on/off outputs.
Intended to control heating and/or cooling in 2- or 4-pipe
installations. Setpoint and fan speed are set using the buttons on the front.
Brand : REGIN
Model : RCF-230AD
RCF-230AD is a room controller intended to control
heating and/or cooling in 2- or 4-pipe installations.
Setpoint and fan speed are set using the buttons on the
front.
Brand : REGIN
Model : RC-DO Room controller with display
RC-DO
Room controller with display
? Awarded design
? Simple installation
? On/Off or 0...10 V control
RC-DO is a room controller from the Regio Mini series
intended to control heating and cooling in a zone control
system.
Brand : BELIMO
Model : D6200W ,D6250W, D6300W
Butterfly valve with Wafer types
? For open and closed cold and warm water systems
? For switching heat generators or cooling machines on and off
The SERIES 605 Magnehelic Indicating Transmitter provides for both visual
monitoring and electronic control of very low differential pressure. The Series 605
is ideal for control applications in building HVAC systems where local indication is
desired during routine maintenance checks or necessary when trouble shooting the
system. The easily read dial gage is complimented by the two-wire, 4-20 mA control
signal utilizing the time-proven Dwyer? Magnehelic gage mechanical design and
Series 600 transmitter technology. The two-wire design with terminal strip on the rear
simplifies connection in any 4-20 mA control loop powered by a 10-35 VDC supply.
MODEL CHART
Model
Range in w.c.
Maximum Pressure
Electrical Accuracy ±%
Mechanical Accuracy ±%
605-00N
0.05-0-0.2
25 psi (1.7 bar)
2
4
605-11
0 to ±.25
25 psi (1.7 bar)
2
3
605-0
0 to .50
25 psi (1.7 bar)
2
3
605-1
0 to 1.0
25 psi (1.7 bar)
2
2
605-2
0 to 2.0
2 psi (13.79 kPa)
0.5
2
605-3
0 to 3.0
2 psi (13.79 kPa)
0.5
2
605-6
0 to 6.0
2 psi (13.79 kPa)
0.5
2
605-10
0 to 10
2 psi (13.79 kPa)
0.5
2
605-20
0 to 20.0
11 psi (75.8 kPa)
0.5
2
605-30
0 to 30
11 psi (75.8 kPa)
0.5
2
605-50
0 to 50
11 psi (75.8 kPa)
0.5
2
Model
Range in Pa
Maximum Pressure
Electrical Accuracy ±%
Mechanical Accuracy ±%
605-60PA
0 to 60
25 psi (1.7 bar)
2
4
605-125PA
0 to 125
25 psi (1.7 bar)
2
3
605-250PA
0 to 250
25 psi (1.7 bar)
2
2
605-500PA
0 to 500
2 psi (13.79 kPa)
0.5
2
SPECIFICATIONS
GAGE SPECIFICATIONS Service: Air and non-combustible, compatible gases. Wetted Materials: Consult factory. Accuracy: See chart. Stability: ±1% FS/yr. Pressure Limits: See chart. Temperature Limits: 20 to 120°F (-6.67 to 48.9°C). Process Connections: 1/8? female NPT. Size: 4? (101.6 mm) dial face, 5? (127 mm) OD x 2-11/16? (68.3 mm). Weight: 1 lb 12.6 oz (811 g). Agency Approvals: CE. TRANSMITTER SPECIFICATIONS Accuracy: See chart (includes linearity, hysteresis, repeatability). Temperature Limits: 20 to 120°F (-6.67 to 48.9°C). Compensated Temperature Range: 32 to 120°F (0 to 48.9°C). Thermal Effect: ±0.025% FS/°F (0.045% FS/°C). Power Requirements: 10 to 35 VDC (2-wire). Output Signal: 4 to 20 mA. Zero and Span Adjustments: Protected potentiometers. Loop Resistance: DC: 0 to 1250 Ω max. Current Consumption: DC: 38 mA max. Electrical Connections: Screw terminal block. Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.